a safe, affordable, fun and competitive motorcycle roadracing experience
In order to safely compete, here’s some of the requirements which must be met:
-Any bolt or cap holding fluid in must be safety wired. -Any nut, bolt, or plug holding your wheels and brakes on must be safety wired. -Any fluid holding line must be clamped -Side stand, license plate and bracket must be removed. -Glass/plastic lenses must be taped over. -No Coolant! Can only use plain water, or water/Water Wetter (or similar) mix. No Engine Ice! -Good Tires with hard plastic or metal valve stems. -Sealed lower fairing (belly pan) -Bar ends must be close ended. -Lever guard on brake lever
There are other requirements that must also be met, please refer to section 5.3 in the CMRA Rulebook for a complete list. All machinery and rider equipment will be inspected by a Tech inspector before it goes on the track, but it’s up to you to make sure your machinery is safe to compete!
Feel free to reach out to us if you have any questions.
Copyright ? 2019 CMRA - Central Motorcycle Roadracing Association